Recent Posts | ThermoAnalytics

Topic: Analysis

Part 4: Validation- Accounting for Variants

By Kristian Haehndel on May 11, 2015

This blog series has discussed the benefits of simulation in every phase of the product design cycle. Part 4: Validation - Accounting for Variants ...

Analysis Automotive Software Thermal

Part 3: Development - Make that Component Vehicle-Compatible

By Antti Jussila on April 23, 2015

In our last blog readers learned how simulation is revolutionizing the Pre-Development phase of the product design lifecycle. Part Three: Make that...

Analysis Automotive Software Thermal Brakes

Part 2: Pre-Development - Build a Component that Works

By Kristian Haehndel on March 19, 2015

In our last blog readers learned how simulation is the secret to reducing 33% or more from the product design lifecycle. Part Two: Pre-Development -...

Analysis Automotive Software Thermal

Part 1: Simulation Methodology - How to Use Simulation to Cut 33% or More from the Product Development Timeline

By Antti Jussila on March 4, 2015

As automotive manufacturers continue to try to shorten the lifecycle of product development and redesign, many are now discovering that simulation...

Analysis Software

Moving from the “Test-and-Fix" Paradigm to "Fix...then Test"

By Cassandra Wagner on October 31, 2014

Though the following events represent an actual, real-world story, the lessons can be applied across the spectrum of automotive manufacturers and...

Recent Posts | ThermoAnalytics | Analysis (3)

Three Strategies for Battery Packaging, Cooling, and System Integration for Electric Vehicles

HVAC Optimization Opportunities for Electric Vehicles

How to Balance Accuracy and Efficiency: When to Use Thermal Simulation, CFD or Both

Topics

Stay up to date